Barco Galaxy NW-7, User Manual

Page: 136 / 220

7. Advanced
48
120
SYNC ASYNC ASYNC
f(Hz)
SOURCE = Mono
FULL SCREEN SYNCHRONOUS MODE = on
@60Hz @60Hz @fsource
STEREO MODE = auto
Image 7-146
Mono source : Full screen synchronous representation ON and Stereo Mode = Auto
Stereo Sources
When a stereo source is connected to the projector following settings can change the way it is displayed :
• Full screen synchronous representation
Following illustrations give an overview on how a stereo source will be displayed in function of its vertical refresh rate and for the
different settings mentioned above.
48 60
96
120
SYNC SYNC ASYNC ASYNC ASYNC
f(Hz)
FULL SCREEN SYNCHRONOUS MODE = on
@120Hz @120Hz @120Hz @fsource @2Xfsource
SOURCE = stereo
Image 7-147
Stereo source : Full screen synchronous representation ON
48
120
f(Hz)
FULL SCREEN SYNCHRONOUS MODE = off
ASYNC
@120Hz
SOURCE = stereo
Image 7-148
Stereo source : Full screen synchronous representation OFF
7.9.2.2 Stereo Mode
What can be done ?
The stereo mode in the display setup menu is the mode in which the display is driven.
Following modes are available :
AUTO the display is driven in stereo if the source is stereo (sync signal on the corresponding mini DIN connector)
ALWAYS the display is always driven in stereo independently of the source (stereo or mono)
INFITEC the display is always driven in In fi tec mode (in fi tec wheel system is activated) independently of the source
(stereo or mono)
Table 7-8
Stereo Mode
132 R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013