Barco Galaxy NW-7, User Manual

Page: 38 / 220

4. Installation
Following parameters are available :
MAC Address MAC Address of the projector (This is a non-adjustable value programmed into the Ethernet
board).
IP Address (Current) IP Address of the projector (This is a non-adjustable value).
Subnet Mask Subnet Mask (This is a non-adjustable value)
Gateway Gateway (This is a non-adjustable value)
DHCP
DHCP setting:
•
Yes : The projector will dynamically obtain its IP address from the DHCP server.
• No : The IP address needs to be entered manually. Note that when selecting Fixed IP
the IP settings fi elds are enabled
IP Address
Fixed IP Address of the projector : this fi eld can be edited when Fixed IP is selected
Subnet Mask Subnet Mask : this fi eld can be edited when Fixed IP is selected
Gateway Gateway : this fi eld can be edited when Fixed IP is selected
Hostname Hostname : this fi eld can be edited when DHCP is selected
How to set up the network settings ?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Installation in the menu bar.
3. Push the ↓ key to pull down the Installation menu.
4. Push the cursor key ↑ or ↓ to highlight Network settings and press ENTER to select.
Image 4-29
A dialog box will be displayed.
34 R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013