3. Engine replacement
Necessary tools
•
Philips screwdriver Ph2
•
Torx screwdriver T20
•
Extended Allen key (hexagonal key) 1.5 mm
•
Extended Allen key (hexagonal key) 1.0 mm
•
Allen key (hexagonal key) 1.5 mm
•
Allen key (hexagonal key) 1.0 mm
•
Allen key (hexagonal key) 2.5 mm (2x)
How to adjust the convergence?
1. Remove the following parts (see concerning chapters):
-
cable basket
-
rear cover
-
top cover
-
engine fan cover 1
-
engine fan cover 2
2. Switch on the convergence pattern: red on blue
Image 3-87
Convergence pattern: red on blue
3. Release the four securing screws of the red formatter board
DMD
2
1
3
4
Image 3-88
Securing screws of the formatter support plate
4. Adjust the convergence of the red channel by changing the position of the red formatter in small steps
-
fi
rst adjust the convergence in the center of the image by moving in the diagonal direction
-
then adjust the rotation in two steps
o
fi
rst concentrate on the left center and the right center of the image
o
then concentrate on the top center and the bottom center of the image
Repeat the actions of this step, until the convergence is within the speci
fi
cation
R59770591 ENGINE KIT 26/08/2010
43