3. Engine replacement
3.4.5.3
Convergence controls of the green channel
Securing screws
Prior to adjusting the position of the formatter, four securing screws must be released! The location of the screws can be seen in
the image below.
1
2
4
3
Image 3-82
Green formatter: securing screws
DMD
2
1
3
4
Image 3-83
Formatter: securing screws (simpli
fi
ed)
Representation of the controls
The drawing below explains how the simpli
fi
ed representation for the controls of the green formatter board was generated and how
it can be interpreted.
DMD
Image 3-84
Simpli
fi
ed representation of the controls of the green formatter
Functionality of the controls
Prior to adjusting (i.e. screwing
clockwise
) any of the controls (1A, 1B, 2A, 2B, 3A or 3B), the adjacent control (e.g. 1B is adjacent
to 1A) must be released a bit (i.e. screwed
counterclockwise
).
R59770591 ENGINE KIT 26/08/2010
41
