Barco Freya, User Manual

Page: 79 / 370

79 R5910032 /00 Freya
• a 3D file
• a 2D MCGD file
• a light sensor calibration file
• a lens position file
A macro can be executed in one of the following:
• Click Execute directly on the concerned macro in Control > Projector > Macros .
• If macro is associated with preset, click on preset button (touch display located on Input & Communication
side of the projector).
• If the rights of the user are not limited to Show manager level, click Execute in the contextual menu of the
concerned macro in Configuration > Projector > Macros .
About Commands
Commands are basic actions used to trigger mechanisms or features of the projector. Some commands can
be relatively basic, such as opening the dowser, associating an action with a general purpose output, or
displaying a pattern. Others, more complex, use settings files to apply specific presets (modify the colorimetry,
switch in 3D mode ...).
Commands are grouped by theme in several tabs. The following commands tabs are available:
• Configurations
• Test pattern
• Output
Some commands require additional parameters such as channel number, pulse duration for GPIO or the
name of the parameter file to be used by the command. These additional actions are performed by clicking
Edit located to the right of each command in the command list
7.1.4.2 Adding a command to a macro
What is possible
Commands list can be completed by new ones, directly selected in the commands set located to the right of
the panel. The command can be added at the end of the list (click
Move ) or drag and dropped directly to the
right location in the list.
How to add
1. While in Macro editor , expand the drop down list (reference 1) related to the command category you need
to explore.
All available commands (reference 2) are displayed (e.g. Test pattern).
Configuration - Projector