Barco FLM HD18, User Manual

Page: 46 / 193

6. Getting started
MENU
EXIT
ENTER
PAUSE TEXT
PHASE
TINT
COLOR
BRIGHTN
CONTR
9 0
7
8
5 6
3 4
1 2
LENS
LENS
ZOOM
LENS
SHIFT
LENS
FOCUS
1
22
2
3
4
5
6
7
8
9
10
11
12
13
14
17
15
16
19
20
18
i
SHARPN
LENS
SHIFT
21
1 2 3 4 5
6
7
8 9 0
MENU
EXIT
ENTER
RGB
STBY PAUSE
TEXT
PATTERN WINDOW PIP LENS
RIGGING AUTO
3 10 10
19
17 5 8 21 9 20 16 6 1 7 2
Image 6-1
Local keypad & remote control
Ind. Key name Description
1 Pattern key Direct access key to the internal pattern selection menu.
2 RGB Toggle key to enable and disable colors in the adjustment mode. Toggle between
red, green, blue and full RGB.
3 MENU Access key to the menu structure and key to quickly quit the adjustment menus.
4 Address key (recessed key), to enter the address of the projector (between 0 and 9) in the remote
control. Press the recessed address key with a pencil, followed by pressing one digit
button between 0 and 9.
5
LENS
Direct access key to the lens adjustment menus. Toggling this key will change the
projected pattern.
6 PAUSE To stop projection for a short time, press ’PAUSE’. The image disappears but full power
is retained for immediate restarting. Shutter is closed.
7 STBY Standby function switch off the lamp and lamp electronics. The lamp cooling fans
remain active for about 5 minutes. The speed of the other fans is reduced.
8 Rigging
Direct access key to the rigging adjustment menus (optional).
9 Auto image Direct access key to automatically project the correct image.
10 Digit buttons Direct input selection or numeric entries
11 Lens zoom/focus Zoom and focus controls of the lens
12
Lens shift Shift control of the lens, to shift the lens up/down or left/right
42 R5976986 FLM HD18 01/09/2006