![background image](http://html1.mh-extra.com/html/barco/f80-series/f80-series_user-manual_3876313050.webp)
R5906852-01
F80 series
50
6.1 Displaying a single source
About selecting a source
Before a source can be projected, the source signal must be connected to the source input(s) of the device
and a valid synchronization signal must be available along with the source signal on at least one of the input
connectors.
How to select?
1.
Press
Menu
to activate the menus and select
Source
.
Image 6-1: Select Source
2.
Press
OK
.
The
Select Source
menu is displayed with the actual available sources filled out.
Image 6-2: Input selection
3.
Select the desired input.
6.2 Connector Settings
About Connector Settings
The Connector Settings menu allows you to change settings for each input connector of the projector.
By default all options for every connector are set to automatic, together with the native Extended Display
Identification Data (EDID).
When entering the menu for each input connector, you can change the following:
•
Color Space
•
Signal Range
•
EDID
How to configure a connector
1.
Press
Menu
to activate the menus and select
Source
.
Summary of Contents for F80 series
