Barco F80 series, User Manual

Page: 47 / 116

R5906852-01 F80 series 47
Press the Menu Selection button (center key of the arrow keys), also called OK button, to activate that item
and to jump one level deeper (3).
Use the numeral keys to enter values, or use the arrow keys to move the bar scale up or down.
Press the Back button to go up one level (4).
Image 5-3: Home menu
Remark: a blue slider bar on the right side of the window means that there are more items to show than those
currently displayed.
Define values
Menu settings are displayed using check boxes, bar scale sliders, and drop-down lists.
To set a value:
•
Press OK to select or deselect a checkbox (turn a function ON or OFF).
•
Use the arrow keys to move the bar scale slider up or down on the value line. For a bar scale 0-9, each
step will equal 10% of the total value.
•
To enter the value as a direct number, press OK , input the digit(s), and then press OK again to execute
and exit cursor mode e.g. OK 79 OK.
Within an input field, use the
* button as backspace button to remove an entered digit. Use the # button to
enter a dot (.).
Changes to values are implemented dynamically.
To enter values with the local keyboard, use the arrow keys to select the first digit, press OK . Select the
second digit and press OK . Continue until all digits are entered. Close the action by selecting the enter (↵)
button and press OK . Select the backspace button and press OK to remove the last entered digit.
Menu memory
The OSD menu remembers the last selected sub-item as long as the projector is running. The menu memory
is reset when restarting the projector from standby.
5.3 Test Patterns
How to use test patterns
1. In the main menu, select Test Patterns .
or
Push the Test Patterns button on the RC or on the local keypad.
Graphic User Interface (GUI)