Barco ClickShare CS-100, Installation Manual

Page: 61 / 108

61 R5900022 /18 ClickShare CS-100 series
4. Check the check box in front of Show network info .
Checked: LAN information such as wired IP address, hostname are displayed. Also the Wi-Fi IP address
and SSID are displayed.
Not checked: no LAN nor Wi-Fi information is displayed.
5. Check the check box in front of Show source names .
Checked: the source name of the shared content is displayed on the screen.
Not checked: no source info displayed on the screen.
6.5 Personalisation, wallpaper
About wallpaper
When CS-100, CS-100 HUDDLE starts up, a background (wallpaper) is displayed. The display of this
background wallpaper can be disabled.
By default a general ClickShare and a quick start wallpaper are available. The possibility exists to upload
personal backgrounds (wallpapers). The default wallpapers cannot be removed from the system.
Wallpaper selection
1. Log in to the Configurator
2. Click Personalisation → Wallpaper .
Image 6–9 Wallpaper selection
The Wallpaper selection pane is shown. The current selected wallpaper is shown with a red border.
3. Select one of the available wallpapers and click on Save Changes .
Note: By default a general Barco CS-100, CS-100 HUDDLE wallpaper and a CS-100, CS-100
HUDDLE Quick Start Guide wallpapers are available.
They are automatically resized to fit the aspect ratio of the screen.
The selected wallpaper is indicated with a red border.
The message Successfully applied changes appears on top of the wallpaper selection window.
CS-100, CS-100 HUDDLE Configurator