R5900022 /18
ClickShare CS-100 series
102
Problem
Cause
Solution
Check out the ClickShare White
paper on Wi-Fi See
www.barco.
com/clickshare
.
Configurator shows error in the
processes “Wi-Fi Access Point
Daemon” and/or “DHCP Server”
Configuration file is corrupted
In the Configurator, goes to
Support & Updates, click on
Troubleshoot and press “Reset to
factory defaults”.
ClickShare Base Unit does not
start up correctly
Configuration file is corrupted
In the Configurator, goes to
Support & Updates, click on
Troubleshoot and press “Reset to
factory defaults”.
No LAN connection with the Base
Unit
Wrong IP address
IP address is not within your LAN
range.
DHCP is not enabled.
No Wi-Fi connection with Base
Unit
SSID not correct
Enter the correct SSID
Barco knowledge base and YouTube videos
Go to the product page on Barco’s website and select in the right column
Support
. You will get access to
Barco’s
Knowledge base
and
Latest tutorial videos
. For more YouTube videos, consult
https://www.youtube.
com/user/barcoTV
and select ClickShare.
Summary of Contents for ClickShare CS-100
