Operation
64
User manual CCFD 2320
Standard input mode
Name
Description
RGB->RGB
The R video signal drives the R
sub-pixels, the G video signal
drives the G sub-pixels and the B
video signal drives the B sub-pix-
els. This is the preferred setting for
color display controllers.
RGB->Y
The RGB video signals from the
imaging board are calculated and
transformed into a single lumi-
nance value according to the for-
mula 0.3R + 0.59G + 0.11B. This
single luminance signal drives the
RGB sub-pixels of the panel
equally.
Use this setting in case the imag-
ing board is a color board and if
the signal must be displayed in
monochrome.
G->Y
The Green video signal from the
imaging board is used as lumi-
nance value to drive the RGB sub-
pixels of the panel equally.
B->Y
The Blue video signal from the
imaging board is used as lumi-
nance value to drive the RGB sub-
pixels of the panel equally.
R->Y
The Red video signal from the
imaging board is used as lumi-
nance value to drive the RGB sub-
pixels of the panel equally.