Installation
24
User manual CCFD 2320
Figure 11
Connecting analog video to the BNC inputs
The video signal must be monochrome. You should use a
proper video cable (e.g., from VGA to BNC). This cable is
not delivered with the system.
Proceed as follows:
1. Connect one end of the signal cable to the analog
video output (monochrome) of the PC.
2. Connect the Video signal to the display’s BNC input
labeled “Video”.
3. Connect the horizontal or composite sync signal to
the display’s BNC input labeled “HS/CS”.
4. Connect the vertical sync signal to the display’s BNC
input labeled “VS”.
Head A
Head B
