Barco BarcoReality 909 Split Pack R9040040, Instruction Manual

Page: 41 / 58

Source connections
6 - 7
5976397 SPLIT PACK REALITY 909 09112001
RS232 Connection
RS232 input and RS232 output of the projector
The projector is equipped with a RS232 port that allows them to communicate with a computer.
Applications
a) remote control:
- easy adjustment of the projector via a computer.
- allow storage of multiple projector configurations and set ups.
- wide range of control possibilities.
- address range from 0 to 255.
b) data communications:
- sending data to the projector or copying the data from the projector to a hard memory device.
Set up of the baud rate for communication with a computer
See 'Changing the baud rate' in chapter 'Service mode'.
RS 232 OUTRS 232 OUT
RS 232 INRS 232 IN
image 2.10
RS232 Connection
Computer
Port on projector
to computer
Communication port for communication with peripherals
Connecting a RCVDS 05 switcher to the projector
- Up to 10 inputs (20 inputs when video and S-video) with the RCVDS 05 switcher (R9827880) and up to 90 inputs when 10 RCVDS
switchers are linked via the 5-cable output modules.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the projector (source selection and analog settings)
- The selected source number will be displayed on a 2 digit display and the selected input modules will be indicated with a LED
on the rear.
image 2.11
Communication port
Port on projector
COMM. PORT
800 periphals
RCVDS 05 switcher
(R9827880)