Barco BarcoReality 909 Split Pack R9040040, Instruction Manual

Page: 40 / 58

Source connections
6 - 6 5976397 SPLIT PACK REALITY 909 09112001
Component video source to port 4/5
Which signal to port 4/5 ?
(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance (Y) input (BNC terminals). The projector detects
automatically where the sync signal is located.
Always use an interface (e.g. Barco Magik Interface R9828120) when a computer and local monitor have to be connected to the
projector as the signal cable coming from the computer is limited to 60 cm due to interferences.
Component video input selection
With the RCU, press digit button 6
RGB Analog source with tri level sync to port 4/5 (option)
Which signal to port 4/5 ?
RGB analog input terminals with tri level sync input or with tri level sync on green (BNC terminals). The projector detects automatically
where the sync signal is located.
This feature requires a optional tri level sync module (Order number: R9828040).
RGB3S or RG3sB input selection
With the RCU, press digit button 7
Component video source with tri level sync to port 4/5 (option)
Which signal to port 4/5 ?
Component video with tri level sync input can be connected to the projector via port 4/5. The projector detects automatically where
the sync signal is located.
This feature requires a optional tri level sync module (Order number: R9828040).
(R-Y)Y(B-Y)3S or (R-Y)Y3s(B-Y) input selection
With the RCU, press digit button 8.
RGB Analog source with composite sync to port 4/5
Which signal to port 4/5 ?
RGB analog input terminals with separate H and V sync inputs, composite sync input or with sync on green (BNC terminals). The
projector detects automatically where the sync signal is located.
Always use an interface (e.g. Barco Magik Interface R9828120) when a computer and local monitor have to be connected to the
projector as the signal cable coming from the computer is limited to 60 cm due to interferences.
The RGB analog input accepts only sources with a horizontal frequency of 32 kHz and higher.
To connect a source lower than 32 kHz, an optional d Limo Pro (R9828631) has to be installed.
RGBS or RGsB Input selection
With the RCU, press digit button 4 or 5, 4 when sync on green, 5 when separate sync.
Computer
Port on projector
Magik Interface
(R9828120)
to computer
to monitor
R G B
Comp / H-Sync V-Sync
PORT 4 / 5
image 6.9
Port 4/5