Barco 7QP User Manual Download Page 105

Page: 105 / 286

7. Advanced

7.4.8

Forced

le load

Forced

le load

In some cases the user wants only one particular

le to be loaded for a particular input (source) i.e. to prevent the (automatic) load

of an inadequate

le.

One can link a

le to every possible input of each layer.

If a

le is already selected (forced) to that particular input it will be indicated in the menu.

How to force a

le to be loaded ?

1. Press

MENU

to activate the Tool bar

2. Press

→

to select the

Image

les

item

3. Press

↓

to Pull down the

Image

les

4. Use

↑

↓

to select

Forced

le load

5. Press

→

to open the menu

6. Use

↑

↓

to select the desired layer (for example Layer 1)

7. Use

↑

↓

to select the desired input (for example Data on BNC)

Image 7-38

Note:

Inputs that are not hardware compatible with this layer are greyed out.

Note:

if a

le is already forced for that input it will be shown on the right.

8. Press

ENTER

The

Load

dialog box is displayed

9. Use

↑

↓

to select the desired

le (for example

/Standard/[email protected]

)

10.Press

ENTER

The

le is selected and will be loaded in the future.

To delete the forced

le, go to the desired input and press ENTER.

R59770330 SIM 7QP SERIES 07/10/2013

101

Summary of Contents for 7QP































































































































































































































































































Search results

Summary of Contents for 7QP

Reviews:

Brands by name

Popular brands

Barco 7QP, User Manual

Search results

Summary of Contents for 7QP

Reviews:

Brands by name

Popular brands