11
Cart Assembly Instructions
Remove all cart parts, hardware, and Grill Head from
shipping boxes. Raise the Grill Lid and remove all
packed components. Use the parts list to check that
all necessary parts have been included.
Assemble the gas grill on a protective work surface
to avoid scratching grill surfaces. Inspect your grill for
damage as you proceed. Do not assemble or operate
your grill if it appears damaged.
When assembling this grill, we recommend asking for
the assistance of another person when maneuvering
some of the larger, heavier pieces. You will need both
an
Adjustable Wrench
and
Phillips Screw Driver
(not provided) for securing the nuts and screws.
1.
Remove cart assembly from shipping box and place
on a flat and level surface such as a garage floor.
Peel back approximately two inches of the protective
PVC film from the Cart Door.
Put the Grill Bowl on the Cart.Slide the Grill Bowl
to align the hole on the Fixing bar.See
Figure 1.
Use 4 of the 1/4"x 1"
Phillips Head screw.
2.
3.
Assembling The Grill
Figure 1
4.
Attach the Left Side Shelf (with Ice Box) on the
Left Bowl Panel. Use 4 of the 1/4"x 3/4" Phillips
Head screw. See
Figure 2A.
Attach the Right Side Shelf (with Side Burner) on
the Right Bowl Panel. Use 4 of the 1/4" x 1" Phillips
Head screw. See
Figure 2B.
Figure 2A
GRILL BOWL
CART
Figure 2B
A.
1/4" x 1" Phillips Head Screw
B.
1/4" x 3/4" Phillips Head Screw
Summary of Contents for Turbo select G5STR
Page 2: ......
