USE AND CARE INSTRUCTIONS
35
Rotisserie Burner Lighting Instructions
Follow steps 1 through 5 of the Grill Lighting Instruc-
tions.
Push and turn Control Knob to and hold knob in.
Keep pressing while you turn knob to and hold in
5 - 10 seconds before releasing.
If ignition does not occur in 5 seconds, turn gas off at
source and turn Control Knobs OFF. Wait at least 5
minutes for gas to clear, then retry. If your grill still fails
to light turn the Control Knob(s) and gas source OFF.
Wait 5 minutes for gas to clear and then conduct a leak
test as explained in Check All Connections for Liquid
Propane/Natural Gas Leaks. If no leaks are detected,
repeat the lighting procedure.
After Burner is lit, turn the tank valve SLOWLY one more
1/4 of a turn.
IMPORTANT:
Do not use the Rotisserie Burner and Main
Burners at the same time. Rotisserie burner is for Rotisserie
Cooking only.
5.
8.
7.
9.
6.
Set Control Knobs to OFF and open the LP Gas tank valve
SLOWLY 1/4 of a turn
. For Natural Gas open the Shut Off
Valve at source.
Push and turn Right Main Burner Control Knob to and
hold in. You will hear a clicking sound from the
electrodes of all burners.
Note: Only the burner you are turning on will ignite. Once
the burner is lit, turn the knob back to .
If ignition does not occur in 5 seconds, turn gas off at source
and turn Control Knobs OFF. Wait at least 5 minutes for gas
to clear, then retry. If your grill still fails to light, turn the burner
Control Knob(s) and gas source OFF. Wait 5 minutes for
gas to clear and then conduct a leak test of ALL gas
connections and gas sources as explained in Check All
Connections for Liquid Propane/Natural Gas Leaks. If no
leaks are detected, repeat the lighting procedure.
After one Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn.
Turn each other burner knob to to light, then back to .
Note: When lighting all main burners, start with the burner
furthest from fuel source location, then light remaining
burners in sequence moving toward fuel source.
ROTISSERIE
BURNER KNOB:
MAIN BURNER
KNOB:
INFRARED BURNER
KNOB:
Infrared Burner Lighting Instructions
Follow steps 1 through 5 of the Grill Lighting
Instructions.
Push and turn Control Knob to and hold knob in.
Keep pressing while you turn knob to and hold in
5 - 10 seconds before releasing.
If ignition does not occur in 5 seconds, turn gas off at
source and turn Control Knobs OFF. Wait at least 5
minutes for gas to clear, then retry. If your grill still fails
to light turn the Control Knob(s) and gas source OFF.
Wait 5 minutes for gas to clear and then conduct a leak
test as explained in Check All Connections for Liquid
Propane/Natural Gas Leaks. If no leaks are detected,
repeat the lighting procedure.
After Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn.
1.
5.
3.
Failure to replace a faulty hose, secure gas supply
connections or to open the Lid before proceeding to
the Lighting Procedures could result in a fire or
explosion that could cause serious bodily injury,
death, or property damage.
WARNING
!
!
4.
2.
Grill Lighting Instructions
Before each use, check all hoses for cracks, nicks, cuts,
burns or abrasions. If a hose is damaged in any way, do
not use your grill before replacing the hose with an
authorized part from the Parts List. Also make sure all
gas supply connections are securely tightened.
Familiarize yourself with all Safety and Use and Care
instructions in this manual. Do not smoke while
lighting your grill or when checking the gas supply
connections.
Be sure that the LP Gas tank is filled, and lock
Casters to prevent movement during grill operation.
Open the Grill Lid.
1.
4.
3.
2.
Main Burner
Rotisserie
Burner
(for STS2611ALP/NG & STS2611BLP/NG Models)
(for STS3211ALP/NG & STS3211BLP/NG Models)
Infrared
Burner
Main Burner
Rotisserie
Burner
Main Burner
OFF
OFF
OFF
OFF
Open LP Gas tank
OFF
1.
2.
4.
3.
5.
