background image

22

About this document

This document shows the necessary information to do these tasks on the Falcon 59/70:
• Installation
• Maintenance
This document refers to the Falcon 59/70 as 'the appliance'. This document is an

essential part of your appliance. Read it carefully before you do work on the appliance.

Keep it in a safe place.
The original instructions of the document are in English. All other language versions of

the document are translations of the original instructions. It is not always possible to

provide a detailed illustration of every single item of the equipment. The illustrations in

this document show a typical setup. The illustrations are for instructional use only.

2.1

How to work with this document

1. Make yourself familiar with the structure and content of the document.
2. Read the safety chapter in detail.
3. Make sure that you understand all the instructions.
4. Do the procedures completely and in the given sequence.

2.2

Warnings and cautions used in this document

Warning
If you do not obey these instructions, there is a risk that can cause personal injury or

death.
Caution
If you do not obey these instructions, there is a risk of damage to the equipment or to

property.
Note
A note shows more information.

Symbol

Description
Visual sign that there is a hazard

Visual sign that there is a notice

2.3

Related documentation

• Installation and maintenance manual
• User manual

About this document

6

Falcon 59/70

Summary of Contents for Falcon 59/70









































Reviews: