7
2.4
Ambient temperature and air exchange
The performance of the device is guaranteed up to an ambient temperature of 32°C provided there is a
suitable air exchange as indicated in paragraph 2.3.
2.5
Final checks
Once the device has been positioned and electrically connected:
•
check that the electrical connection has been correctly made;
•
wait at least 4 hours before powering up the device, thus giving the thermodynamic circuit time to
stabilise.
2.6
Protective devices
The device is equipped with the following protective devices:
•
fuse on power board to protect against overloading;
•
thermal cut-off switch in compressor to protect against overloading and malfunctions;
•
double circuit-breaker to protect against malfunctions by the heating element.
3.
USE
This device is intended mainly for the blast chilling and blast freezing of foods. If foods are cooked and blast
chilled, they maintain their sensory properties for 5-7 days; if foods are blast frozen, they maintain their
consistency and original flavour after thawing.
3.1
User warnings
•
read this handbook carefully and always use it as a reference;
•
if malfunctions are identified in the device, for example a damaged power cord or faulty control
panel, turn the device off immediately and contact the service centre;
•
the device can be used by children over the age of eight and by people with reduced physical,
sensory and mental capabilities, or who lack experience and adequate knowledge, provided they
are supervised or have already received instructions on how to use the device safely and
understand the dangers inherent to its use. children must not play with the device;
•
do not introduce explosive substances such as spray cans with flammable propellant into the
device;
•
this device is intended for domestic use;
•
during operation and depending on the programme being run, the device may heat up. Take
suitable precautions when working inside the device. Keep children away.
•
this device is intended only for the specific use for which it was designed: i.e., blast chilling, blast
freezing, sanitation, thawing, proofing, heating, slow cooking, cooling of foods and beverages in a
domestic setting. All other uses shall be considered improper and potentially hazardous.
3.2
Preliminary internal cleaning
Once electrically connected and positioned, before turning the device on the inside of the cell must be
thoroughly cleaned using a soft cloth and neutral detergent. When finished, remove any cleaning residue.
Do not use stainless steel scrapers, abrasive, acidic or aggressive substances that may irreparably damage
the internal surfaces.
3.3
The core probe
The core probe is an accessory used to measure the temperature inside foods.
In programmes including use of the core probe, the process automatically ends when the set food
temperature is reached.
If the core probe is not connected to the device and the user wishes to use the probe mode, the message
“Connect probe to start programme” appears on the display.
Correct use involves the insertion of the probe into the food before the programme starts.
Summary of Contents for 1ABFY
