Barazza 1ABEVEN, Instruction Manual

Page: 13 / 32

13
Fig. 4 – Product data label
Note : do not remove, alter, damage or modify the data label.
3.2 Electrical connection
Before installing the appliance ensure that the existing electrical systems comply with the law and correspond
to the data on the appliance label to be installed in terms of voltage [V], frequency [Hz] and input power [W].
The appliance has a power cable with a 16 A Schuko plug.
3.3 Positioning
Do not install in places with poor ventilation and high temperatures, or locations in direct sunlight or subject
to weathering. Avoid proximity to heat sources.
Make sure, once the installation is complete, there are no obstacles to the door opening.
Do not use extensions to the power cable in order to avoid overheating problems.
Note : for the proper operation of the appliance an air flue of at least 250 cm
2
is required (Fig. 5) on the
rear of the appliance.
Once the positioning is complete, secure the appliance with suitable screws.
438
mm
450
mm
50
mm