Barazza 1ABEVEN, Instruction Manual

Page: 20 / 32

20
Options
Type of food : specify the type of food to be chilled.
Preparation : specify if the food on the tray is whole or in a different form (i.e.: sliced, diced,
in pieces, etc.).
Weight : select the quantity of food on the tray.
Initial state : if the food has just been baked or if it’s hot, select “hot”. If it’s at ro om
temperature or warm, select “Room temp.”.
Before starting
It is possible to verify the information in the summary screen and, if necessary, modify the
duration of shock freezing process. The factory pre-set duration value blinks and by single
press it is possible to access to the screenshot where it is possible to modify the duration value.
During the program The display shows the freeze settings and the remaining time to the end of the program.
CORE MODE
Options
Type of food : specify the type of food to be chilled.
Preparation : specify if the food on the tray is whole or in a different form (i.e.: sliced, diced,
in pieces, etc.).
The above settings are necessary to determine which program will produce optimal freezing.
Before starting It is possible to verify the information in the summary screen.
During the program The display shows the settings and the remaining time to the end of the program.
AT THE END OF THE PROGRAM
In any shock freezing operation mode, at the end of the program the appliance beeps and displays an information
message. It then switches to preservation mode which maintains the temperature of -18°C at the food core until the user
intervenes. At the end of all steps a defrosting cycle is carried out.
Note : opening the door during shock freezing causes the introduction of warm and moist air, increasing
the duration of the process. In the "Recipe" mode the duration of the program is fixed: repeatedly opening
the appliance door could lead to imperfect shock freezing. Do not open the appliance door during the shock
freezing program.
3.18.5 Cooling
Freshly cooked food is not at the correct temperature for serving or for further processing and therefore
there is a waiting period for natural acclimatisation.
The cooling program reduces these waiting times in the kitchen.
COOLING
Options
Air temperature : select the desired temperature for cooling the food.
Cycle length : select the duration of the cooling program.
Before starting It is possible to verify the information in the summary screen.
During the program The display shows the settings and the remaining time to the end of the program.
AT THE END OF THE PROGRAM
The device beeps and displays an information message.
No temperature preservation function is carried out to ensure the food is served correctly.
3.18.6 Beverages
Blast chillers are very helpful when there is not enough time to prepare beverages for drinking. This program
reduces the temperature of a drink according to the available time.