Installation & Operating Instructions
|
Baracuda XA Robotic Pool Cleaner
21
MAINTENANCE
To maintain the longest possible life of the robotic cleaner, we
recommend to check all the parts of the cleaner.
Maintenance at least once a month.
1
CLEANING THE CLEANER
• The appliance must be cleaned regularly using clean or slightly soapy
water. Do not use solvents.
• Rinse the appliance thoroughly with clean water.
• Do not let your appliance dry in the sun by the pool.
To preserve the integrity of the cleaner and guarantee optimum performance:
- The filter and brushes should be replaced every 2 years,
- Examine the wear indicator on the tracks and replace the tracks as soon
as the indicator is reached.
• The cleaner’s performance may be reduced if the filter
is full or dirty.
• Clean the filter with clean water after each cleaning cycle.
If the filter is blocked, clean it with an acid solution (white vinegar, for example).
It is recommended that you do this at least once a year, since the filter will clog if not
used for several months (winterising period).
To avoid serious injury: Disconnect the cleaner from the power supply.
2
CLEANING THE FILTER
WITH SINGLE
FILTRATION
WITH DUAL
FILTRATION
