12
Baracuda XA Robotic Pool Cleaner
| Installation & Operating Instructions
ATTACHMENT TO THE BASE
ELECTRICITY SUPPLY CONNECTION
1
2
• In order to avoid any risk of electrocution, fire or serious injury,
please follow the instructions below:
• Use of an electrical extension is prohibited when connecting the
control box.
• Make sure that the socket can be easily accessed at all times and
is protected from rain or splashes.
• The control box is impervious to spray but must not be immersed
in water or any other liquid. It must not be installed in a floodable
area; keep it at least 3.5 meters away from the edge of the pool
and avoid exposing it to direct sunlight.
• Place the control box near the socket.
Connect the
floating cable
into the
control unit.
Push the
connector in until
you hear 2 clicks.
Make sure the
connector is
sufficiently pushed
into place.
If it is
not, repeat the
operation.
Connect the
power cord.
Only connect the
control unit to
power outlet
protected by a
30mA maximum
residual current
device. (If in doubt
contact a qualified
technician)
To disconnect
the floating cable
from the control
box, pinch the
2 clips at the
end of the
connector and
pull at the same
time.
1
3
4
2
