Installation & Operating Instructions
|
Baracuda XA Robotic Pool Cleaner
13
CONTROL BOX FUNCTIONS
STARTING A CLEANING CYCLE
The control box is used to control the main functions or to connect the
cleaner to the home Wi-Fi network ("Using the iAquaLink™ app only
applicable to XA4060iQ").
Start/stop the cleaning cycles
Change the "Surface to be cleaned" mode
Set up the iAquaLink™ connection
Lift System mode
KEYS
INDICATOR LIGHTS
"Floor only" mode activated
"Floor + walls + waterline" mode activated
Bluetooth™ connection status
Wi-Fi connection status
• The control box switches to standby after 10 minutes. Press any key to
exit standby mode. Standby mode does not stop the appliance if it is in
a cleaning cycle.
In order to avoid any risk of injury or material damage,
please follow the instructions below:
• Bathing is prohibited when the appliance is in the pool.
• Do not use the appliance during a shock chlorination. Wait until
the chlorine level has reached the recommended value before
immersing the cleaner.
• Do not use the appliance if the roller shutter is closed.
