Operation manual
Bär SmartControl 2.0
40000001186_EN_03.docx
Page 34 / 39
Date: 31/03/2020
Ja
ck
l
eg
2
Drive out:
Drive in:
or
The Drive In/Drive Out Jack leg 2 option is only possible if
the Cargolift has the “Single jack leg” option.
Activating the optional mode.
To select the Jack leg 2 option:
Press the function pushbutton.
Jack leg 2 LED illuminates.
To drive out the jack leg:
Press the “Lower” pushbutton 2 x then hold it down.
The jack leg drives out until the pushbutton is
released.
To drive in the jack leg:
Press the “Lift” pushbutton 2 x then hold it down.
The jack leg drives in until the pushbutton is
released.
U
nd
er
run
ba
r
Drive out:
Drive in:
or
The “Lift/Lower under run bar” option is only possible if the
Cargolift has the “Under run bar” option.
Activating the optional mode.
To select the “Under run bar” option:
Press function pushbutton briefly 3 x.
“Under run bar” LED illuminates.
To lower the under run bar:
Press the “Lower” pushbutton 2 x then hold it down.
The under run bar lowers until the pushbutton is
released.
To lift the under run bar:
Press the “Lift” pushbutton 2 x then hold it down.
The under run bar lifts until the pushbutton is
released.
C
us
tomer
f
un
c
ti
on
s
Function A:
Function B:
Function C:
Function D:
or
The “Customer functions” option is only possible if the
Cargolift has the “Customer function” option.
Activating the optional mode.
To select the Customer functions option: Press
function pushbutton briefly 4 x.
“Customer function” LED illuminates.
To execute the customer function:
Press the “Lift”/ “Lower”/ “Close”/ “Open” pushbutton
2 x briefly.
The customer function is executed.
No customer functions are currently available.
D
ea
cti
va
ti
ng
the
op
ti
on
a
l
mode
or
The optional mode is deactivated when:
-
no pushbutton is actuated for longer than 7
seconds.
2x+h
2x+h
2x
2x+h
2x+h
3x
2x
2x
2x
2x
4x
