background image

29

Operating Instructions

  

bar-positurn2 and bar-positrol

English

Guarantee:

We guarantee the fault-free function of our 
product according to our advertising, the 
product information and this documentation 
issued by us. Further product features are 
not promised. We undertake no liability for 
economy and fault-free function, when the 
product is used for other purposes, as de-
scribed in the section „Designated Usage“. 
Damages  are  generally  excluded,  except 
in the case of criminal intent or gross neg-
ligence committed by bar GmbH is proved, 
or in the case of promised product features 
being  absent.  If  this  product  is  exposed  to 
non-prescribed environments, for which it is 
not suitable or does not correspond to the 
technical standard as stipulated therein, we 
cannot and will not be held responsible for 
the consequences.

The products manufactured by bar GmbH 
are designed to give a long service life. They 
correspond to the state of the art for science 
and technology and are individually tested in 
all functions before dispatch. The electrical 
and mechanical construction corresponds 
to valid standards and guidelines. bar GmbH 
constantly carries out ongoing tests on the 
products and the marketplace, to ensure 
the further development and improvement 
of their products.

In case of faults and/or technical problems, 
please contact our service department. We 
can assure you, that immediate appropri-
ate measures will be initiated. Valid here 

are the Terms of Warranty from bar GmbH, 
which we will send to you upon request.

bar pneumatische 
Steuerungssysteme GmbH

Auf der Hohl 1
D-53547 Dattenberg
Tel.: +49 (0)2644-9607-0
Fax: +49 (0)2644-9607-35
E-Mail: [email protected]
www.bar-gmbh.de

Summary of Contents for bar-positurn2































Reviews: