The radio must be powered off before attaching or
removing the battery, you may rotate the power/volume
knob all the way counter-clockwise to make sure it has
been turned off.
Push the battery slowly in parallel with the radio body,
the lower edge of the battery is about 1-2 cm below the
radio’s edge.
Once aligned with the guide-rails, slide the battery
upward until you hear a click to lock the battery in
place.
Battery
Installation
To remove the battery, press “PUSH” buckle on the middle top
(see Figure 2. 1,”Baofeng UV-5R EX Radio, overview”), as you
slide the battery downward.
Removal
How to hook up and use the charger correctly:
1. Plug the DC connector of the power adaptor into the charger base.
2. Plug the AC connector of the power adaptor into a main ac wall outlet.
3. Place the radio in the charging base.
4. Make sure the radio is making contact with the charger. When the red LED
comes on steady, your radio is charging.
5. The radio is fully charged once the charger’s green status LED goes steady.
Please remove the radio at that time to avoid the over-charging.
Charging and battery maintenance
Charging
Battery should be fully charged before initial use. Optimum battery efficiency
will be achieved after the three full battery charge and discharge cycles.
Visit Radioddity.com For Downloads And Help
06
Visit Radioddity.com For Downloads And Help
07
