SITE: Sounds alarm through your radio
speaker only
TONE: Transmits a cycling tone over-the-air
CODE: Transmits ’119’
（
911 in reverse?)
followed by the ANI code over-the-air
32
AL-MOD – Alarm
Mode
SITE [0]: Sounds alarm through
your radio speaker only
TONE [1]
：
Transmits a cycling
tone over-the-air
CODE [2]
：
Transmits
‘119’(911 in
reverse?) followed by the ANI
code over-the-air
Bandsetting
33
Band
VHF(0) UHF(1)
When enabled, priority is returned to
selected display once the signal in the
other display disappears.
34
TDR-AB–Transmit
selection while
in Dual Watch
mode
OFF[0] | A[1] | B[2]
This function is used eliminate squelch
tail noise between Baofeng handhelds
that are communicating directly (no
repeater).Reception of a 55 Hz or 134.4
Hz tone burst mutes the audio long
enough to prevent hearing any squelch
tail noise.
35
STE - Squelch Tail
Elimination
OFF[0] | ON [1]
This function is used eliminate squelch
tail noise when communicating through
a repeater
36
RP-STE - Squelch
Tail Elimination
OFF [0] | 1 - 10
Delay the Tail Tone of Repeater(X100
milliseconds)
37
RPT-RL - Delay
the squelch tail of
repeater
OFF [0] | 1 - 10
Controls the behavior of the display when
the transceiver is turned on.
38
PONMSG - Power
On Message
FULL [0]: Performs an LCD
screen test at power-on
MSG [1]: Displays a 2-line
power-on message
Sends an end-of-transmission tone to
indicate to other stations that the
transmission has ended.
39
ROGER- Roger
Beep
OFF [0] | ON [1]
40
Resets the radio to factory defaults,
with some exceptions.
RESET - Restore
defaults
VFO [0] | ALL[1]
Visit Radioddity.com For Downloads And Help
60
Visit Radioddity.com For Downloads And Help
61
