07
I
A series
Setting the Password
3.1 In the measurement mode, press and hold the
key to enter the
setup menu.
3.2 Press the
key to highlight
Password
, press the
Enter
key to
confirm.
3.3 Press the
key to select the
Enable
. Press the
Enter
key, the
screen shows 0000.
3.4 Press the
/
key to set the password, press the
Enter
key
to confirm each digit until the meter returns to the measurement
mode.
Unlock the Password
If your password has been created, the meter will show a password
protection screen when pressing the
Cal
key. Press the
/
key to enter the password, press the
Enter
key to confirm. If password
is correct, the meter will unlock immediately.
If you forgot your password, please contact the supplier and providing
the serial number of meter.
Factory Reset
4.1 In the measurement mode, press and hold the
key to enter the
setup menu.
4.2 Press the
key to highlight
Factory Reset
, press the
Enter
key
to confirm.
4.3 Press the
key to select the
Enable
, press the
Enter
key, the
screen shows "Are you sure you want to reset the meter
?"
4.4 Press the
Enter
key to confirm or the ESC key to cancel.
To exit the setting without saving changes, press the
ESC
key.
