Bante904P Portable Conductivity/DO Meter
8
Calibration Due:
When the option is enabled, if the meter does not
calibrated within a specified time period, the meter
will automatically show the
icon.
…
1 to 31 days
Disable
Disable
Date and Time:
Set the current date and time.
---
Year-month-day, hour-minutes
Clear Stored Data:
Delete all stored readings in the memory.
Enable
Disable
Disable
Factory Reset:
If enabled, all of the calibration data and selected
parameters will back to factory default settings,
the meter must be recalibrated.
Enable
Disable
Disable
Setting the default option
1.1
Press and hold the
key for 3 seconds to enter the setup menu and the
or
key to select the menu item (e.g., CELL/P-01).
1.2
Press the
Enter
key, the display shows an option.
1.3
Press the
or
key to select the desired option.
1.4
Press the
Enter
key to confirm, the meter returns to the measurement mode. Setting is completed.
If you want to exit the setting, press the
Meas
key.
Setting the date and time
2.1
Press and hold the
key for 3 seconds to enter the setup menu and the
or
key until the display shows
“
DATE
”
.
2.2
Press the
Enter
key, the meter shows current year (e.g., 2018).
2.3
Press the
or
key to set year and the
Enter
key to confirm, the display shows current date and time (Format: month-day, hour-minutes).
2.4
Press the
or
key to set the date and time, press the
Enter
key to confirm until the meter returns to the measurement mode. Setting is
completed.
Menu
Page
Option
Menu
