Bante904P Portable Conductivity/DO Meter
1
Introduction
Thank you for selecting the Bante904P portable conductivity/dissolved oxygen meter. This manual provides a step-by-step guide to help you operate the
meter, please carefully read the following instructions before use.
Unpacking
Before unpacking, ensure that the current work environment meets following conditions.
•
Relative humidity is less than 80
%.
•
Ambient temperature is greater than 0° C and less than 60° C.
•
No potential electromagnetic interference.
The following list describes the standard components of the meter. After the unpacking, please check all components are complete. If any are damaged or
missing, please contact nearest distributor.
Bante904P Conductivity/DO Meter
CON-1 Conductivity Electrode
DO100 Dissolved Oxygen Probe
TP-10K Temperature Probe
Conductivity Standard Solutions
DO Membrane Cap
DO Electrolyte Solution
Electrode Clip
Carrying Case
