DX80 Quick Start Guide
P/N 128185
Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
2
1
2
3
4
5
6
7
SETTING UP
1
2
3
4
5
6
7
DX80 Gateway and Node Front-Panel Interface
Rotary Switch 1 (left)
Sets the Network ID (NID) to a value from 0 to 15
Rotary Switch 2 (right)
On Gateway:
Sets Device Address and displays its settings
On Node:
Sets the Node’s Device Address (1-7)
Push Button 1
Single-click to advance across all DX80 menus.
Push Button 2
Single-click to move down interactive menus.
Double-click to move back to top-level menu.
LED 1 and 2
Provide real-time feedback to the user regarding RF link status, serial communications activity, and Error state.
LCD Display
Six-character display provides run mode user information and shows enabled I/O point status. This display allows the user to conduct a
Site Survey (RSSI), assign Network ID, and modify other DX80 configuration parameters without the use of a PC or other external software
interfaces.
etc.
etc.
Rotary Switches: Used to set Network ID & Device Address
Push Buttons: Used to navigate the Gateway and Node menus and program device configurations
