background image

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the 

time

 it is returned to the factory, is found to have been 

defective

 during the warranty period. This warranty does not cover

damage or liability for misuse, abuse, or the improper 

application

 or 

installation

 of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the 

discretion

 of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY

OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT

DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any 

obligations

 or 

liabilities

 

relating

 to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper 

application

 or 

installation

 of this product or use of the product for personal 

protection

 

applications

 when the

product is 

identified

 as not intended for such purposes will void the product warranty. Any 

modifications

 to this product without prior express approval by Banner Engineering Corp will void the

product 

warranties.

 All 

specifications

 published in this document are subject to change; Banner reserves the right to modify product 

specifications

 or update 

documentation

 at any 

time.

Specifications

 and product 

information

 in English supersede that which is provided in any other language. For the most recent version of any 

documentation,

 refer to: 

www.bannerengineering.com

.

 

 

L-GAGE

®

 LT7 Long-Range Time-of-Flight Laser Sensor

 

©

 Banner Engineering Corp. All rights reserved

 

Summary of Contents for L-GAGE LT7 Series





















Reviews: