5 Activating Services
5.1 Banner Cellular Data Services
5.1.1 Activate Cell Services
Follow these instructions to activate the cellular data plan for your DEK Series Kit.
The DEK Series kit uses a cellular network specifically designed for IoT devices that use low power, have minimal data
consumption, and are low cost. Banner has created several tiers of service plans for IoT deployment. Select the appropriate
plan size for the kit to avoid any data overage fees applied to your account.
1. Visit the
at our support site to determine a suitable plan for your needs.
2. Using a web browser, navigate to
Figure 12. Banner cellular data opening screen
3. Select the region the system is operating in.
•
If the system is within the contiguous United States, select
United States
from the region drop-down list.
•
If the system will be used in Alaska, Hawaii, Canada, or Mexico, select
North America
.
4. From the drop-down list of cellular data plans, select the plan identified by the
.
5.1.2 Create an Account
Figure 13. Banner cell data username and password screen
1. Enter an email address (username) and password.
2. Enter the requested payment information for your account.
3. Enter your mailing address and contact information.
4. Review and accept the terms and conditions.
5.1.3 Add a Device to the Cellular Network
1. Navigate to the
My Services and Equipment
section.
The purchased type of service displays.
DXM Enclosure Kit (DEK) Series
www.bannerengineering.com - Tel: + 1 888 373 6767
15
