1. Go to Reading Phase > Phase Mode > Phase On and select an input bit from the Industrial Protocol Input Bit list.
In this example, select Bit 2.
Industrial Ethernet Bits
Figure 59. Industrial Ethernet Input Bits Configured for Phase On Control
2. Click Phase Off, and select the same bit used in step 1 from the Industrial Protocol Input Bit list.
3. Change selected bit polarity from Leading to Trailing.
The reading phase will start when the input bit goes high, and end when the input bit goes low.
Figure 60. Industrial Ethernet Input Bits Configured for Phase Off Control
ABR 3000 Series Barcode Reader
www.bannerengineering.com - Tel: + 1 888 373 6767
49
