Banner ABR 3000 series Instruction Manual Download Page 37

Page: 37 / 112

5. After the application-specific code is positioned, click Pause to stop image acquisition.

Figure 44. Advanced Setup—Application-Specific Code

6. Click Image Settings, and then click

Image Auto Setup to automatically acquire the best

exposure time and gain values.

7. Select the reading option.

• Static—No maximum limit on exposure time
• Dynamic reading—Maximum allowable image exposure is automatically calculated using the parameters

8. Click Start.
9. Click Apply.

Figure 45. Image Auto-Setup

Note: For applications having multiple lighting or code reading conditions, up to 10 different Image
Settings can be configured by adding them with the

icon.

ABR 3000 Series Barcode Reader

www.bannerengineering.com - Tel: + 1 888 373 6767

Summary of Contents for ABR 3000 series
















































































































Search results

Summary of Contents for ABR 3000 series

Reviews:

Related manuals for ABR 3000 series

Brands by name

Popular brands

Banner ABR 3000 series, Instruction Manual

Search results

Summary of Contents for ABR 3000 series

Reviews:

Related manuals for ABR 3000 series

Brands by name

Popular brands