Banner A-GAGE MINI-ARRAY MAC-1, Instruction Manual

Page: 14 / 31

1
+
–
10–30 V dc
Gate
16–30 V dc
1.2 A Max.
2 3 4
5 6 7 8
9
10 13 14 15
F1
BROWN BLUE DRAIN
(BARE)
BLACK WHITE
EMITTER and
RECEIVER CABLES
V- V+
30 V
150 mA
Max.
ALARM
Power
12 11
Com Com
4–20 mA
I out 2
4–20 mA
I out 1
4.4.6 MAC16P-1 Controller Wiring
Terminals #15 through #30 are open-collector PNP transistor outputs rated at 30 V dc maximum, 150 mA maximum. They are protected
against overload and short circuits. The isolated gate input is at pins 11 and 12.
Controller terminal #15 (output #16) may be used as an output or as an alarm. Whenever this output is
active, the red Alarm LED is ON.
All outputs are current sourcing.
1
+
–
10–30 V dc
Gate
16–30 V dc
1.2 A Max.
2 3 4 5 6 7 8
9
10 13 14
15 30
F1
BROWN BLUE DRAIN
(BARE)
BLACK WHITE
EMITTER and
RECEIVER CABLES
V- V+
Power
12 11
NC NC NC NC
through
16 Solid-state Ouputs
V+
150 mA Max each
4.4.7 MAC16N-1 Controller Wiring
Terminals #15 through #30 are open-collector NPN transistor outputs rated at 30 V dc maximum, 150 mA maximum. They are protected
against overload and short circuits. All outputs are current sinking.
Controller terminal #15 (output #16) may be used as an output or as an alarm. Whenever this output is
active, the red Alarm LED is ON.
A-GAGE
®
MINI-ARRAY
®
Measuring Light Screen System
14 www.bannerengineering.com - Tel: 763.544.3164