3. Select one of the following
options.
• Select Stop to freeze the data.
• Select Step to
initiate
a single scan of the array. This simulates a “snapshot” of what is viewed by the array when Step is
selected. Step simulates a gate input command.
• Run simulates the
Continuous
scanning mode.
4. Click Exit to exit the Measurement Output screen.
5. To close the PSF
Configuration
screen, select either Quit or Exit.
Use the Execute command to test the response of a gated system.
A-GAGE
®
MINI-ARRAY
®
Measuring Light Screen System
24
www.bannerengineering.com - Tel: 763.544.3164
