High-Resolution MINI-ARRAY Features
• Excels at high-speed, precise process
monitoring and inspection applications
• A comprehensive combination of scanning
modes and outputs:
– 10 measurement (“Scan Analysis”) modes
– 3 scanning methods
– Beam blanking
– Selectable continuous, gated or host-
controlled scan initiation
– Programmable hysteresis for high and low
limits
– Serial communication options
• Storable scanning programs eliminate
reprogramming for repeated applications
• Non-volatile memory stores alignment
settings
• All models with both Analog and Discrete
outputs
• Analog output Null setting
• Low cost, compared with similar systems
• Precision sensors have a 380 mm to 1.8 m
(15" to 6') working range
• Wide field of view, easily aligned
• Alignment routine equalizes gain of each
beam for reliable 2.5 mm (0.10") object
detection throughout the array
• Host computer or PLC may be used to initiate
scans and/or process scan data
• Unique addresses for up to 15 control
modules on one EIA-485 Party Line
¤
A-GAGE® High-Resolution MINI-ARRAY® Instruction Manual
For controllers with 2 analog and 2 discrete outputs
Printed.in.USA. 04/12 P/N 64118 rev.C
9714 10th Avenue North • Minneapolis, MN 55441
Phone: 763.544.3164 • Fax: 763.544.3213
Email: [email protected]
¤
WARNING . . .
Not To Be Used for Personnel Protection
These sensors do NOT include the self-checking redundant
circuitry necessary to allow their use in personnel safety applications. A
sensor failure or malfunction can cause either an energized or de-energized
output condition. Consult your current Banner Safety Products catalog for
safety products which meet OSHA, ANSI and IEC standards for personnel
protection.
!
