NOTE! You need to calibrate the stand before you
can use the motorised movement of the stand.
When first-time setup is complete, you can then set up your loudspeakers for Home
cinema use.
Stand adjustment
Set the maximum angle the TV will turn – left and right.
Calibrate the stand
The motorised movement of the TV will not
work until the calibration process has been
completed.
At ‘SET LEFTMOST
POSITION’ turn left to the
point you wish to restrict
the movement to
At ‘SET RIGHTMOST
POSITION’ turn right to the
point you wish to restrict the
movement to
Set preferred preset position for the TV to turn to, when it is switched
on and off. See p. 54.
At ‘SET TOP POSITION’ tilt
up to the point you wish to
restrict the movement to
At ‘SET BOTTOM POSITION’
tilt down to the point you wish
to restrict the movement to
Accept*
2
STAND POSITIONS
STAND ADJUSTMENT
51
