Adjust picture and sound settings
Picture and sound settings are preset from the factory to neutral values which
suit most viewing and listening situations. However, if you wish, you can adjust
these settings to your liking.
Temporary settings
‘DEFAULT VIDEO’
‘DEFAULT AUDIO‘
To only store picture and sound settings until you switch off the TV, press and hold
BACK
instead of the
centre
button when
you accept the settings.
The speaker combination chosen in the ‘DEFAULT VIDEO’ submenu is activated automatically when you switch on a video
source in the TV.
The speaker combination chosen in the ‘DEFAULT AUDIO’ submenu is activated automatically when you switch on an audio
source in the TV.
Preset volume, bass, treble or loudness, up to
two connected BeoLab subwoofers and two
default loudspeaker combinations. The
contents of the ‘SOUND’ menu varies
according to what you have connected to the
TV. See also p. 22 about speaker
combinations.
Adjust sound
Adjust brightness, colour and contrast. For
information on picture format, see p. 22.
Adjustments made to the ‘TINT’ setting only
apply to the current channel.
Adjust picture
Enter and accept
settings
Select ‘OPTIONS’
menu
Bring up ‘TV SETUP’
menu
Enter and accept
settings
Select ‘SOUND’ in
‘OPTIONS’ menu
Bring up ‘TV SETUP’
menu
Select ‘PICTURE’
menu
Select
‘ADJUSTMENT’
menu
Remove the picture from the screen
temporarily.
Mute the picture
Select
Picture
Bring up
Scene
display on Beo5
Select
PictureMute
to mute/restore
PICTURE
BRIGHTNESS
.......
.
.......
CONTRAST
.......
.
.......
COLOUR
.......
.
.......
TINT
.......
.
.......
SIZE
.......
.
.......
HOR. SIZE
.......
.
.......
VERT. SIZE
.......
.
.......
HOR. POSITION
.......
.
.......
VERT. POSITION
.......
.
.......
select
SOUND ADJUSTMENT
VOLUME
.......
.
.......
BASS
.......
.
.......
TREBLE
.......
.
.......
SUBWOOFER
.......
.
.......
LOUDNESS
ON
DEFAULT VIDEO
SPEAKER3
DEFAULT AUDIO
SPEAKER2
store
28
NTSC signal only
1080p/i signal only
VGA signal only
