Expand your setup
Information
Your TV supports a wide range of additional equipment. You can even connect a
projector or a home automation system to control room lights and curtains.
Connect video recorders only to AV1 or AV2.
‘AUTO SELECTION’
‘TIMER RECORDER’
‘HDMI’
Automatic selection of connected sources, when the TV is on and detects a signal.
Activate the Timer recording option for a connected recorder. Only available in the ‘AV1’ and ‘AV2’
menus, and can only be activated in one of these menus at any time.
Equipment connected via an HDMI IN socket. If you have set the ‘HDMI EXPANDER’ in the
‘CONNECTIONS’ menu to ‘YES’, the ‘HDMI-C’ option in the ‘AV’ menus is replaced with ‘HDMI-C1’,
‘HDMI-C2’, ‘HDMI-C3’, and ‘HDMI-C4’.
Disconnect from the mains
While expanding your setup, the TV must be
disconnected from the mains.
Disconnect TV from mains
Switch off TV
Connect additional equipment
To operate non-Bang & Olufsen products with
Beo5, attach a Bang & Olufsen IR-transmitter to
each product. See also p. 44.
Make the connections
Select corresponding socket
marked PUC
Switch on the TV
Always attach covers before you connect the
TV to the mains.
Connect TV to mains supply
Attach all covers
Switch on TV
42
