- 12 -
Wireless charging system 600W specification
For 12V・24V・
48V
battery
- 18 -
3.
各ヘッド取付け注意事項
3-1
周囲金属の影響
周囲金属による影響を避けるため、必ず下記に示す値以上の空間を設けてヘッドを設置する事。
・給電ヘッド/RCS600-AH
A＝45mm、D＝46mm
・受電ヘッド/RCS600-CH
B＝57.5mm、C＝87mm、E＝45mm
3-2
相互干渉
ヘッドを取り付ける場合、相互干渉による影響を避けるため、必ず下記に示す値以上の間隔を
あけてヘッドを設置すること。
RCS600-AH,RCS600-CH
共に
A=400mm
3-3.
ケーブル曲げ
R
ケーブルの曲げ
R
は下記数値以上にすること。
電力ケーブル：
R50
、 通信ケーブル：
R30
4.Notes at the time of installation (at the time of attachment)
● Notes at the time of installation of the charging unit and power supply unit
・Location
In order to obtain a good cooling effect, please keep as shown below the separation distance between
the surrounding body so as not to block the airflow.
● Notes of each head when mounting
・Influence of surrounding metal
To avoid influence of surrounding metal, keep minimum spacing.
Also, please remove metal chips and cutting pieces on the transmission surface of the head part. Metal piec-
es may generate heat, which may result in damage to equipment or accidents. Therefore, install it so that the
metal does not face each other for a long time within the range outside the specifications.
50mm or more
50mm or more
50mm or more
100mm or more
■ Active Head ／ RCS600-AH
Power supply unit
Charging unit
■ Passive Head ／ RCS600-CH
A
B
C
D
E
Active Head
RCS600-AH 45
46
Passive Head
RCS600-CH
57.5 87
45
(mm)
non-metal
non-metal
metal
metal
F
F
F
F
G
金属
■給電ヘッド/RCS600-AH-L
■受電ヘッド/RCS600-CH-L
F
G
Active Head
RCS600-AH-L
0
40
Passive Head
RCS600-CH-L
(mm)
■ Long Distance Specification Active Head ／ RCS600-AH-L
■ Long Distance Specification Passive Head ／ RCS600-CH-L
metal
