B&K AVR 707, User Manual

Page: 23 / 80

Your B&K receiver has both unbalanced line level RCA surround outputs for use with other external amplifiers and 5-way binding speak-
er binding posts for use with the 125 watt internal power amplifiers. Both types of outputs connect from the receiver directly to the ampli-
fier in the system or corresponding speaker. When connecting audio cables to the amplifier, be sure to match the labeled output chan-
nels to the position of the speaker in the room.
Audio Output Connection - Speakers
The AVR 707 powers 7 speakers and the AVR 705 powers 5
speakers. Be sure to match the appropriate speaker output to
the speakers location in the room. For example, connect the
center channel output the the center speaker amplifier chan-
nel. If a five channel audio system is desired, do not connect
the surround back audio channels. If a six channel audio sys-
tem is desired, connect the sixth channel to the surround back
left channel.
14
To Speakers
Audio Output Connection - Unbalanced
The AVR 707 and 705 receivers support
7.1 RCA surround outputs. Typical usage
is for use with other external amplifiers.
These outputs may be used to connect
external amplifiers and/or a subwoofer to
the receiver. Be sure to match the appro-
priate pre-amp output to the speakers
location in the room. For example, con-
nect the center channel output the the
center speaker amplifier channel. For use
in a five channel audio system, do not connect the surround back audio channels. For use in a six channel audio system, connect the
sixth channel to the surround back left channel.
Shown is the AVR 707 unbalanced outputs
connected using standard RCA cables to
the unbalanced inputs on a Reference
125.7. The subwoofer output may be used
as a line source to a powered subwoofer.
Audio Output - Hardware Connections