B&K AVR 707, User Manual

Page: 26 / 80

17
Keypad Connection
The Keypad connection may be used with any CK 1.2, CK 1.1 or CK 2.2 keypads. A keypad would connect using a straight CAT-5 cable
as shown. Up to 5 keypads may be daisy-chained from the Keypad Connection on the AVR 707.
IR Chain Connection
The IR chain is used for two way communication with the CT 600.3, 600.1 or 300.3. When linking multiple CT products (see the CT man-
ual) the AVR 707 would be last unit in the chain. Shown are two CT 600.3 linked as follows: Out of 1st CT to In of 2nd CT, Out of 2nd
CT to IR Chain of AVR 707.
Flasher Outputs / All IR Output / IR Input
Flasher Outputs - The AVR 707 allows for basic IR routing capabilities. In the AVR
707, IR will route from the keypad terminal, the IR input or the front panel flasher to
the IR output for only the input that is selected. For example if Input 1 is selected, the
IR information will only come from IR output 1. All connections are 1/8” mono mini-
jack (Tip + Ring -).
All IR Output - All IR information coming from the keypad terminal, the IR input or the
front panel flasher will be sent to the All IR output. This connection is a 1/8” mono mini-
jack (Tip + Ring -).
IR Input - This allows other IR device information to be sent to the AVR 707 from “RF
to IR devices... etc”. This connection is a 1/8” mono mini-jack (Tip + Ring -).
Keypad / IR - Hardware Connections
From the B&K
To the B&K