B&K AVR 707, User Manual

Page: 22 / 80

13
Audio Inputs - Hardware Connections
Audio Input Connection - Multi-channel Analog 5.1 or 7.1
Multi-channel Analog is available from players such as a Blu-Ray-Ray player, SACD player, DVD-Audio player, etc. B&K analog inputs
5,6,7,8 are used as the inputs for a player’s 5.1 or 7.1 analog output. The Multi-channel Analog input must be assigned for use with a
source input 1 through 14. Assignment is set in Menu - System Settings - Audio - Audio
Assignment Section. Additionally the input may be set to work with a 5.1 or 7.1 player.
Once set, Multi-channel audio is selected via the DVD-A remote button.
Note: if the Multi-channel Analog input source is assigned to an HDMI input 9-14, only
Multi-channel Analog operation is allowed for the specified HDMI input.
Audio Input Connection - Balanced Input
The stereo balanced input carries a balanced analog audio signal from a source piece such as a CD player, etc. The stereo balanced
input must be assigned for use to an input source 1 through 14.
Audio Input Connection - AES-EBU Digital
The AES-EBU digital balanced input carries a digital audio signal from a source piece such as a CD player with an AES-EBU output. The
AES-EBU input must be assigned for use to an input source 1 through 14.
Audio Input Connection - Stereo Analog
The B&K surround receiver provides eight pairs of stereo analog audio inputs.
These inputs may be used to send a stereo analog audio signal from a source
piece to the B&K. Connect the stereo analog audio output on the source piece
using a RCA cable to the analog stereo audio input on the B&K. Shown is a
stereo analog audio source going into the stereo analog audio input on Input
1. Analog input 5,6,7,8 may be assigned for use as a single multi-channel
analog input. See Multi-channel Analog 5.1 or 7.1 below.
The order of audio signal precedence per each input is Optical Digital -> Coax Digital -> Stereo Analog.