Bandit
17
Copyright 12/17
MODEL 18XP/1590
DECALS
D-03 6/17
LOCKOUT ALL ENERGY SOURCES
BEFORE SERVICING OR REMOVING
GUARDS OR HOODS!
1. Shut off engine/motor. Key in possession.
2. Disengage pto/clutch.
3. Wait for cutter disc/drum to come to a
COMPLETE STOP
(takes at least several
minutes).
4. Install disc/drum lock pin.
5. Loader arm (if equipped) securely on ground
and hydraulic pressure released.
6. Unplug engine disable
plug-in.
7. Remove padlock from hood pin.
8. Press down and hold hood spring lock pin (on
disc chippers).
9. Retract hood pin.
DO NOT RESTART UNTIL ALL GUARDS
AND HOODS ARE SECURELY AND
PROPERLY INSTALLED.
DANGER
!
DECALS