Status:
Alarm
Guard
Panic
Beep
Fire
Front
Front
Error
Error
Alarm
Guard
Panic
Panic
Status:
Status and fault indication.
21
2 x
3 x
Indicated failure
The MCU reads unreal values.
Heat exchanger temperature error.
Action
Back to factory
Back to factory
Number of
flashes
This red LED flashes according to a determined flash cycle when a
technical
failure is detected. This flash cycle indicates the type of failure that's been
detected. Counting the number of flashes (blinks red) per cycle of 5 seconds.
will indicate what the error is.
This three-color LED indicates the following states:
Status and fault indication - p. 27
The heat exchanger is at normal operating temperature (OK)
Monitoring mode (Guard).
Front-LED
As long as the fog generator is connected in monitoring status [Guard] by
its
controller, the green and red flashing is not shown by the Front LED
on the fog generator.
The LED flashes (approx. 1 Hz). The fog generator is warming
up the
heat exchanger to its operating temperature (From a
cold state and depending on the model, this may take
up to
30 min. time after the application of voltage).
Until the operating temperature is reached the fog generator
will not emit fog.
There is a problem or a failure, look at the controller.
This indicates the problem (the red LED lights?).
Fog Generator is in the panic or alarm status
.
Indicated failure
BANDIT
Controller CF31 v2
/ Manual v.102
