Bandit
Copyright 11/10
PAGE 7
MODEL 490
The words Danger, Warning, Caution, and
Notice are used on the safety decals and throughout
this manual, to make you aware of the safety
procedures. These procedures are very important,
read and obey them.
YOUR SAFETY IS VERY IMPORTANT TO US!
This machine is equipped with safety decals, guards
and designs for your protection.
Don’t ever take the machine for granted, always
be cautious and careful when operating your
equipment.
Read and follow all the instructions in your manual
thoroughly. Your safety is dependent on your knowledge
of how to operate and maintain this machine. You may
obtain additional copies of this manual from your Bandit
Dealer.
Before operating machine, you must have all potential
operators; read and understand manuals and decals,
watch the video and follow the recommendations.
Regardless of how hard a manufacturer tries to
produce a safe machine, accidents still happen.
Normally accidents are caused by people making
mistakes. They do not read the manual, they ignore
warning decals or do not use lockouts provided for
their safety. This normally happens after the person
has become accustomed to the machinery. In the
initial start up and operation of the machinery, they
are cautious, they are very careful because they do
not understand the machine.
This equipment is intended for use by personnel
who are experienced with similar equipment. Always
operate safely. There should be at least two qualified
and trained operators at the work site. They should
be positioned in safe working locations, following
safety procedures and instructions, and aware of each
others whereabouts. There should, also, be at least
two people on site during maintenance and service
procedures in case an accident should occur. Never
operate any machine while under the influence of drugs
or alcohol.
Keep children, bystanders and animals clear of
working area. Never operate equipment that is in need
of repair or adjustment.
Before starting the machine, take a minute to check
a few things. The machine should be in an area
restricted from people passing by. This area around
the machine must be free of all objects that can obstruct
your movement when working with the machine. The
machine should be checked for loose tools or foreign
objects, especially in the infeed hopper area. All tools
not in use should be secured in a tool box.
Operators
must
at all times be located within easy
reach of all controls and shut-off devices when the unit
is running. They must be attentive and prepared to
activate the devices.
Torn or loose clothing is more likely to get caught in
moving machinery parts or tree branches. Keep such
items as long hair, shirt sleeves, and shirt tails properly
contained. Avoid wearing necklaces, rings, watches,
and especially neckties while operating this machinery.
Make sure the machine is in excellent condition, and
all the guards are in place, tight and secure.
Wear all personal protection equipment and follow
all safety standards per ANSI and OSHA instructions.
Examples of equipment: hard hat, face shield,
safety glasses, gloves, ear protection, etc. Do not
wear gauntlet or secured fit gloves. Always keep a
fully charged fire extinguisher with the machine while
operating or servicing the machine.
DANGER
WARNING
DANGER
SAFETY PROCEDURES
SAFETY PROCEDURES
DANGER
Diesel engine exhaust and some of its
constituents are known to the State of
California to cause cancer, birth defects,
and other reproductive harm.
