Bandit
Copyright 11/10
PAGE 16
MODEL 490
DECALS
DECALS
Decals located on your Bandit equipment contain useful information to assist you in operating your
equipment safely. Some of the decals on your machine and their location are shown in this section.
It is very important that all decals remain in place and in good condition on your machine. Please follow the
care and instructions given below:
1) You should use soap and water to keep your decals clean. Never use mineral spirits or any
other abrasive cleaners.
) Replace immediately any missing or damaged decals. The location the decal is going to be
applied to must be clean and dry, and at least 40°F (5°C) before applying decal.
3) When the need arises to replace a machine component with a decal attached, be sure and
replace the decal.
4) Replacement decals are available, and can be purchased from the manufacturer or your
Bandit Dealer.
5) Peel back about half of the backer paper on the decal. Position it on the flat, dry, clean surface so it
is smooth and secure. Peel off the remainder of the backer paper as you continue to stick the decal
on the surface.
6) Rub decal from the center outward to remove air bubbles and to secure contact.
7) Combination English / Spanish decals are typically standard. Other foreign language decals are
available and may be purchased. Mail translated decals required to Bandit Industries, Inc.
EXAMPLES:
